Xtreme Power Conversion Corporation
XC User’s Manual
Page 9
Portable Air Conditioning
WARNING!
DO NOT connect / disconnect the power cord or attempt to operate buttons with wet hands. This
could result in electrical shock.
NOTE:
Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign material.
The unit is equipped with an approved NEMA plug configuration (XC-14A = 5-15P; XC-22A = 6-15P; XC-30A =
6-20P). The appropriate outlet must be used for each plug type.
Operation
Control Panel
Control Panel
1.
POWER BUTTON
• Activates unit when POWER BUTTON is pressed.
•
Fan starts on low speed.
• If POWER BUTTON is pressed during operation, unit stops.
2.
BLOWER BUTTON
• Changes fan speed from LOW to HIGH when pressed.
3.
SPOT / COOL BUTTON
• Activates compressor and begins producing cool air 2 minutes after button is pressed.
• Regulates temperature based on outlet cool air temperature.
4.
ROOM / COOL BUTTON
• Activates compressor and produces cool air 2 minutes after button is pressed.
• Regulates temperature based on inlet ambient air temperature.
5.
SET TEMP BUTTON
• Change target temperature / data value by ± 1.
• Change data value by ± 10 by pressing continually.
• Press the SET TEMP BUTTONS to set temperature
• Upper button is to heighten temperature and Lower button is to lower temperature.
6. ALARM
• Alarm indicator light blinks and indicates abnormal system operation.
• If Alarm occurs, compressor stops.
• System operation stops when ALARM light is activated / blinking longer than 3 minutes.
7.
CURRENT TEMP
• Displays current room temperature in display in Fahrenheit (in ROOM COOL MODE only)
• SPOT / COOL Mode displays outlet (cool air) temperature during normal operations.
• In order to change °F to °C, press SPOT / COOL and ROOM / COOL buttons together for 2 seconds.
