13
!
!
The charger may get warm to the touch, so make sure you charge them in an open area and do not lay anything on the charger unit while charging.
Although you cannot over-charge the batteries, we recommend that you do not leave the charger plugged in for more than 24 hours.
If your charger shows a solid green light after charging for a short period of time, your battery may have been only partially dis- charged (short ride),
or this may be the sign of a partially worn out battery with reduced storage capacity. Continue charging for the full time, to cover all the bases. If the
battery still has not charged, you may need to replace it.
Even with proper care, a rechargeable battery does not last forever. Average battery life depends on use and conditions.
The charger and charger port should be regularly inspected for damage (cord, plug, enclosure, etc.).
if damage is found stop using the affected part until the it can be repaired or replaced.
Bicycle assembly
Assembly Guides
Follow the assembly guide contained within this manual or visit
www.x-tremescooters.com/support/
for assistance.
Getting Started
Open the carton from the top and remove the bicycle. Remove the
straps and protective wrapping from the bicycle. Inspect the bicycle and all accessories and parts for
possible shortages. It is recommended that the threads and all moving parts in the parts package be
lubricated prior to installation.
Do not discard packing materials until assembly is complete to
insure that no required parts are accidentally discarded.
**
Note: Your bicycle may be equipped with different style components than the ones illustrated
within this manual.
We recommend that you contact X-Treme if you have doubts or concerns as to your experience or ability to properly assembly,
repair, or maintain your bicycle
All manuals and user guides at all-guides.com
