R90 ONLINE USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
Xtreme Power Conversion Corporation (Rev 3/7/14)
Page 44
Parameters setting
The setting function is controlled by 3 buttons (Enter
, Off
, On
)
Enter
- goes into the setting page and value adjustment
Off
and On
- is for choosing different pages
Enter
setting mode after the UPS is on by pressing
and
for 2 seconds
Exit
setting mode by waiting 30 seconds after last button has been pressed. Settings will not be
saved when exiting setting mode in this option.
Save Settings
by adjusting parameters on each setting screen a needed. Once the last
parameter screen has been reached (parallel redundancy quantity setting) press
to exit and
save all settings.
Mode setting
MODE SETTING
(Note: the information in the red box will be flashing)
After entering the setting menu, mode setting is defaulted, and the model setting line flashes as in
above image. Use the Enter
button to choose different modes. There are 3 different modes for
setting: ECO, PAL, and NOR. Press Off
or On
to exit the mode setting (save the mode setting), and
then goes to output voltage setting or parallel redundancy quantity setting.
