AMPLIFIER SETUP
STAND ASSEMBLY
www.xtremesignal.com
Tel 1.877.697.4462
by Solid Signal
Installation of the Amplifier
Be sure the cable coming out of the section
labeled ANT. goes directly to the HD-BLADE.
Amplifiers make up for signal loss after
they’re inserted. Connect the
remaining coax to the port labeled TV.
Supply power to the amp via USB
Plug the included USB to Micro-USB cable
into a USB power source. Most HDTVs,
BluRay, DVD players, and sound systems
have an open USB port that you can use to
power this amplifier. You can also use a USB
Power Supply that are commonly included
with most cell phones and tablets.
When used for models
HDBLADE100V, HDBLADE100VA,
HDBLADE100VC, and
HDBLADE100VCA, only the first
two sections of the stand need to
be assembled.
HDABLADE100A, HDBLADE100CA,
HDBLADE100VA, & HDBLADE100VCA
ONLY APPLIES TO AMPLIFIED MODELS:
ONLY APPLIES TO MODEL: HDBLADESTAND
To assemble the HD-BLADE stand
first snap the bottom portion of
the stand onto the base. Next
insert the top of the stand into
the assembled base.
ANT.
TV