CONSTRUCTION OF STOVE
OPERATION
1.
Slowly open propane tank valve;
2.
Press the Range Knob and turn it counterclockwise to the 90 degree “ON”
position. When you hear a click, observe the fire. If it is already lit,
continue to press the Range Knob for 3-4 seconds before letting your hands
out. If the fire goes out after letting hands out. Please repeat the above
ignition method;
.
3.
When the knob is turned to the 90 degree position, the firepower is the
maximum. You can continue to adjust the firepower counterclockwise or
clockwise.
4.
Turn the Range Knob to
"OFF "
position, and you can extinguish the fire.
NOTES:
CONNECTING NEW GAS SOURCE OR STOVE HAS NOT BEEN USED
FOR A LONG TIME, THERE MAY BE AIR INSDE THE HOSE. YOU
MAY NOT IGNITE THE STOVE AT THE FIRST TIME. AT THIS TIME,
THE OPERATION CAN BE REPEATED TILL AIR INSDIE THE HOLE
IS EXHAUSTED. NEVER PUT THE HEAD CLOSE TO THE BURNER
WHEN IGNITION TO AVOID ACCIDENTS.
HOW TO HANDLE ABNORMAL SITUATION
Abnormal Situation
Reasons
You can try to
Ignition Problem
Gas tank valve is closed
Open Gas tank valve
Hose is blocked or out of
shape
Clean the hose and make it
with normal shape, or
change new hose
Air inside the hose
Repeating ignition till air
inside the hose is exhausted
No gas insdie the gas tank
Change the new gas tank
Gas leaking
Hose isn’t connected well
or broken
Re-connect the hose or
change new hose
Range Knob is not in OFF
position
Put the Range Knob in
OFF position
