Xtreme Power 61058 Скачать руководство пользователя страница 3

IMPORTANT SAFETY INFORMATION

2

Personal Protection Equipment and proper safety attire must be worn when operating this machinery. The 

operator must wear approved safety equipment appropriate for the job such as hard hat and safety shoes 

when conditions require. Hearing protection MUST be used (operational noise levels of this equipment 

may exceed 85db). Eye protection MUST be worn at all times. 

Keep body parts and loose clothing away from moving parts. Failure to do so could result in dismemberment

or death.

DO NOT

 modify the machine. 

Stop motor/engine when adjusting or servicing this equipment. Maintain a safe operating distance from 

flammable materials. Sparks from the cutting-action of this machine can ignite flammable materials or 

vapors.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains 

chemicals known to cause cancer, birth defects, or other reproductive harm. Some examples of these 

chemicals are:
• Lead from lead-based paints, and
• Crystalline silica from bricks and concrete and other  masonry products.  Your risk of exposure to these 

chemicals varies depending on how often you do this type of work. To reduce your risk: work in a well 

ventilated area, use a dust control system, such as an industrial-style vacuum, and wear approved personal

SAVE THESE WARNINGS

SPECIFICATIONS

Содержание 61058










Отзывы: