background image

GENERAL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to follow the warnings and instructions may 

result in electric shock, fire and/or serious injury. Save all warnings and instructions for future 

reference. 

SAFETY 

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible 

conditions and situations that may occur. It must be understood by the operator that common sense and 

caution are factors which cannot be built into this product, but must be supplied by the operator.

Read and understand all instructions.

 Failure to follow all instructions may result in serious injury or 

property damage.

DO NOT

 allow persons to operate or assemble the product until they have read this manual and have 

developed a thorough understanding of how it works.

DO NOT modify this product in any way. 

Unauthorized modification may impair the function and/or 

safety and could affect the life of the product. There are specific applications for which the product was 

designed. 
This portable pressure washer is a highly specialized multifunctional machine with reliable safety 

assurance, which must be inspected before it can be used to wash cars, bikes etc. 

1

IMPORTANT SAFETY INFORMATION

The electric supply connection should be made by a qualified electrician and comply with IEC 60364-1. 

It is recommended that the electric supply to this machine should include either a residual current device 

that will interrupt the supply if the leakage current to earth exceeds 30mA for 30ms or a device that will 

prove the earth circuit. 

The motor on this pressure washer does not run continuously. It will only run when the spray trigger gun 

is squeezed. After following the startup procedures in this manual, turn the trigger for activation. 

Close supervision is necessary when the machine is in use near children. 

ALWAYS

 disconnect power before disassembling or repairing the machine. 

Ensure safety devices are operating normally before using the machine. Know how to stop the machine 

and bleed pressure quickly, be familiar with the controls. 
Only put the machine on a stable platform when using, transporting, assembling or dismantling the 

machine. 

The machine is not intended to be connected to a potable water mains. If necessary, use only an inlet 

hose-set approved by IEC 61770. 

Keep clear of the nozzle. 

NEVER

 direct high pressure spray at an person, animals or self. 

ALWAYS

 wear safety goggles and protective clothing when operating the machine. 

NEVER

 try to stop or deflect leaks with any body parts. 

DO NOT 

use pressure that exceeds the operating pressure of any of the parts (hoses, fitings etc) in the 

pressurized system. Ensure all equipment and accessories are rated to withstand the maximum working 

pressure of the unit. 

Содержание 61032











Отзывы: