Xtreme Power 47519, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 15

OPERATION
■ Overheated: Under the condition above, if the tool
does not start, the Battery are overheated. In this
situation, let the Tool and Battery cool before
pulling the Trigger Switch again.
■ Low battery voltage: The remaining Battery capaci­
ty is too low and the tool will not operate. In this
situation, remove and recharge the Battery. drilled
dry. The cutting lubricants that work best are
sulfured cutting oil or lard oil.
PROBLEM SOLUTION
■
WHY DOES THE DRILL NOT TURN ON WHEN
YOU PRESS THE SWITCH?
The forward/reverse rotation control, which is on
top of the trigger, is positioned in the lock function.
Unlock the forward/reverse rotation control by
putting it into the required rotation position. Push
the trigger and the drill will start to rotate. Or if the
LED light flashes at the same time you press the
Switch, please charge the battery.
■
THE DRILL STOPS BEFORE THE SCREW
IS COMPLETELY TIGHTENED. WHY?
Verify the torque position of the torque adjusting
ring, you can find the torque-adjusting ring between
the chuck and the drill body. Position 1 is the lowest
torque (screw driving force) and position 18 is the
highest torque (screw driving force). Position � is
for drill operation. Position
'i]'
is for heavy drilling.
Regulate the torque adjusting ring to a higher
position to reach the best result.
■
REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having not
used a battery pack for a prolonged time will
reduce the battery pack working time. This can be
corrected after several charge and discharge
operations by charging & working with your drill.
Heavy working conditions such as large screws
into hard wood will use up the battery pack energy
faster than lighter working conditions. Do not
recharge your battery pack below 0 ° C and above
40 ° C as this will affect performance.
ENVIRONMENTAL PROTECTION -
This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to a
collection system. It will then be recycled or dismantled in order to reduce the impact on the environ­
ment. Electric and electronic equipment can be hazardous for the environment and for human health
since they contain hazardous substances.
DISPOSAL OFAN EXHAUSTED BATTERY PACK
Li
To preserve natural resources, please recycle or dispose of the battery pack properly. This battery pack
contains Li-ion batteries. Consult your local waste authority for information regarding available recycling
and/or disposal options. Discharge your battery pack by operating your tool, then remove the battery
.
pack from the tool housing and cover the battery pack connections with heavy-duty adhesive tape to
prevent short circuit and energy discharge. Do not attempt to open or remove any of the components.
11