16" SCROLL SAWS
16
GB
TROUBLE SHOOTING
Problem
Cause
Remedy
Saw blades break
Tension incorrectly set
Set the correct tension
Load to great
Feed the workpiece more slowly
Incorrect saw blade variety
Use the correct saw blades
Workpiece not fed straight
Avoid exerting pressure from the side
Motor does not
function
Mains Gable faulty
Change faulty parts
Motor faulty
Call customer service. Do not at-
tempt to repair the motor yourself as
this should be carried out by trained
personnel.
Vibration
(NOTE: The saw
vibrates slightly
when the motor is
running in normal
opera- tion.)
Saw incorrectely installed
Set the correct tension
Unsuitable underlay
Feed the workpiece more slowly
The work bench is not screwed
down or is on the motor
Use the correct saw blades
The motor is not secured
Avoid exerting pressure from the side
Saw blade swings
out., holders not
aligned straight
Holders not aligned
Losen the screws with which the hold-
ers are fastenedto the arm. Align the
holders so that they are perpendicular
to each other and retighten the screws
In the interests of operational safety, always switch off the saw and remove the mains plug
before carrying out maintenance work.
TROUBLESHOOTING