Xtreme Power 45080, Инструкция по эксплуатации и правила безопасности

Страница: 10 / 13

OPERATION
9
Hold the workpiece tightly at all times while buffing. One hand near the contact point will give you better
control.
Keep buffing wheels raked out before each use and when build-up gets heavy during use. “Raking” means
to clean the buffing wheels with a wheel rake to remove build up compounds and metal particles. An old
rough-cut saw blade or a large hacksaw blade will also work as an alternative to a wheel rake. ALWAYS
use light pressure when raking wheels.
DO NOT mix two different compounds on the same wheel. for best results, use a separate wheel for each
compund.
Use an upward stroke with heavy to moderate pressure cutting. Use a downward stroke with light pressure
for polishing. See Fig. 5
LUBRICATION
Shielded and pre-lubricated ball bearings require no lubrication for the life of the bearings. All bearings are
standard sizes and replacements can be found from our parts department or a bearing supply store.
SPECIFICATIONS