Xtreme Power Conversion Corporation
XC User’s Manual
Page 10
Portable Air Conditioning
• C will blink 2 times and the figure will change to °C
• ALARM codes blink and are displayed when abnormal operation occurs.
8. TARGET TEMP
• Displays the unit set temperature for ROOM COOL mode only
Maintenance
Filter Cleaning
There are two filters in the unit. The evaporator filter is located at the front of the unit. The condenser filter is
located in the rear of the unit.
Pull the filter frame forward to remove the back filter.
Removing Rear Filter
Remove dust from the filter using a vacuum cleaner hose attachment.
If required, was the filter in lukewarm water with a mild detergent. Leave to dry in a shaded area before reinstall
-
ing.
Cleaning the Filter
1.
To clean the evaporator filter, pull the front filter guard forward from the top until the guard is open (in an
angled position) and resting on the supporting cables.
2.
Slide the filter up and use a vacuum cleaner to remove the dust from the filter.
3.
If the filter is heavily covered with dust and dirt, warm water and mild soap or neutral detergent may be used
to wash the filter. Do not use any other chemicals to clean the filter, as they will likely damage the filter.
4.
Dry the filter in a shaded area before replacing it. Do not operate the unit without the filter installed and the
filter guard in the closed position.
