Xtreme Power Conversion Corporation
NXTi 3P-3P User’s Manual
Page 17
Uninterruptible Power Supply
CHE
Check
OP.V
Output voltage
PAR
Parallel, 001 means the first UPS
AN
The first phase
BN
The second phase
CN
The third phase
AB
The first line
BC
The second line
CA
The third line
LCD Setting
There are three parameters to set up the UPS. Refer to following diagram.
Note: The following order of setting code only presents when UPS is in Bypass Mode or no-output mode. The set-
ting code number will change the numbers under other modes. For example, when the UPS is in AC mode, the to-
tal available setting becomes 7 only. Then, setting code of “Bypass mode setting” will become 01, “Battery backup
time setting” will become 02, and so on.
