4
ENGLISH
Preparing for Flight
1. Remove the battery cover on the back of
the controller using a screwdriver.
2. Insert 4 new “AA” alkaline batteries by
matching the polarity (+ and -) markings
shown inside the battery compartment.
3. Replace the battery cover.
1. Plug the
battery connector
into the
Power port
on the underside of
the Mini Stealth Drone and then place Mini Stealth Drone on a stable
surface (i.e., flat ground). If it’s placed at an angle, this can disrupt
the function of the auto-stabilization system.
2. Press the
ON/OFF Button
on the controller to turn it on. The controller beeps twice and
the Power indicator lights up.
3. To link up the controller and the Mini Stealth Drone with each other, move the
controller’s
left stick
up to the highest position. You will hear a beep once. Then move
Installing Batteries in the Controller
Charging the Mini Stealth Drone
Powering the Mini Stealth Drone
The Mini Stealth Drone is equipped with a Lithium Polymer (LiPo) battery. The battery is not
fully charged at shipment. For best performance, fully charge the battery before the first
use. Follow the instructions below to charge the Mini
Stealth Drone.
1. Plug the battery connector on the underside of
the drone into the output of the
USB charging
cable
. The battery connector only fits in one way.
Do not force the connectors together.
2. Connect the
USB plug
on the
USB charging cable
to one of the following:
• a USB 2.0 (or later) port on your computer while
the computer is on
• a stand-alone USB charger such as those used
for cell phones or tablets
.
A steady red light will glow on the
USB charging cable
letting you know that the battery is charging. Under
normal operating conditions, it may take up to 50
minutes to recharge the battery.
3. When the charger light goes out, the battery is fully
charged and the drone is ready to be flown. Remove the
battery connector from the USB charger.
Note: Always allow the battery to cool before using and recharging to prolong battery
life. Don’t use USB hubs, USB 1.0 or USB 1.1 ports: these may not have enough current to
properly charge the Mini Stealth Drone.
