manualshive.com logo in svg

XtraVac TS420, Руководство пользователя

Поделиться
Скачать
XtraVac TS420 Скачать руководство пользователя страница 7

 

6

1.1.2

 

Preparations during transportation   

1.1.2.1

 

The weight of this machine is 100-150kg, so that the loading capacity of any handling 

device is recommended to be more than 1000kg. If you are not sure of the safe 

loading capacity, please contact the manufacturer of such handling device. If the 

situation is clearly understood, don’t try to handle the machine by yourselves. 

1.1.2.2

 

Either by lifting or by handling, it’s necessary to check the balance carefully in 

advance. 

1.1.2.3

 

The work of lifting or by handling should be carried out by means of qualified 

operator. 

1.1.2.4

 

During machine handling, any people or car is not allowed to approach the 

surrounding of the machine. 

1.1.2.5

 

During handling, notice that whether there is any person or barrier on the handling 

path and the surrounding of the machine. If it is, clear it before machine handling. 

 
 
 

 

 
 
 
 
 
 

Содержание TS420























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды