13
4.2.2 Vacuum oil replacement.
4.2.2.1 Recommended vacuum oil: BP Engergol RC100, Esso Nuto H100, Mobil Rarus 427.
4.2.2.2 Drain the oil completely before filling new oil.
4.2.2.3 Oil capacity should be kept at least two-thirds of total amount.
4.2.3 If the heat-resistance cloth on the heater is damaged, please replace it immediately.
4.2.4 If it’s necessary to open the upper lid for cleaning or components change, please turn off
the power in advance. Then open the lid and push the plug pin (G8) inside to support
the lid. After maintenance, recover it original situation.
4.2.5 Change the oil of the vacuum pump for every 300 hours. If the packaged product is full
of juice, shorten the oil replacing cycle time. Also check the oil level from oil sight
glass every week. Oil capacity should be kept at least two-thirds of total amount. If the
oil is dirty, please replace it immediately.
4.2.6 The disposal of discarded material should be in accordance with the local environmental
regulations.
4.2.7 Detail drawing of the oil pump
1.
Air release hole
2.
Oil filling hole
3.
Oil sight glass
4.
Oil draining hole
XtraVac CM1440B J-V027 Operation & Parts Manual
XtraVac Packaging Machines
CM1440B J-V027 Belted Chamber Machine
419 E. 11th Ave. North Kansas City, MO 64116 USA
+1 (800) 728-2999 [email protected]
