Xtramus NuTAP-311, Руководство пользователя

Страница: 23 / 60

23
E-mail: sales@xtramus.com
Website: www. Xtramus.com
XTRAMUS TECHNOLOGIES ®
C. NuTAP-311 HyperTerminal Command
– mode
Command Descriptions
– mode
mode
show
The mode show command allows you to view NuTAP-311
’s redirect mode
( aggregation , segregation , or multi-mirror ) settings.
set
The mode set [aggregation | segregation | multimirror] <m0 | m1> command
allows you to set NuTAP-311
’s redirect mode for
Monitor Port M0/M1 . For example, to
set NuTAP-311 Monitor Port M0 to aggregation redirect mode, please input the
command
“
mode set aggregation m0
”.
D. NuTAP-311 HyperTerminal Command
– monitor
Command Descriptions
– monitor
monitor
show
The monitor show command allows you to view header and media type for all
NuTAP-311
’s ports (Network Port A0/A1 and Monitor Port M0/M1).
header
The monitor [m0 | m1 | port=all] header [da | sa | id | dip | sip | dport | sport | mtu]
<Parameter> command allows you to configure NuTAP-311
’s
Monitor Ports M0/M1 .
The configuration options available includes:

DA: Destination Address

SA: Source Address

ID: ID

DIP: Destination IP Address

SIP: Source IP Address

DPORT: Destination Port

SPORT: Source Port

MTU: Maximum Transmission Unit
For example, to set NuTAP-311 Monitor Port M0
’s destination port to port 9, please
input the command
“
monitor m0 header dport 0009
”. The formats for each available
configuration option are listed down below:

DA/SA: XX-XX-XX-XX-XX-XX

ID: XXXX

DIP/SIP: XXX.XXX.XXX.XXX

DPORT/SPORT: XXXX
mode
The monitor [m0 | m1 | port=all] header mode command allows you to set
the combinations of headers that will be added to packets to/from designated
Monitor Port (
MAC , ID , Timestamp , IP , Port , Fragment ). For example, to add
the header with ID and IP to packets to/from Monitor Port M0, please input the
command
“
monitor m0 header mode id+ip
”
reset
The monitor [m0 | m1 | port=all] header reset command allows you to reset
all settings made to the specific Monitor Port. For example, to reset all settings
done for Monitor Port M0, please input the command
“
monitor m0 header
reset
”.