12
E-Mail: [email protected]
Http://www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
In
Transmit
tab, the main purpose is to edit frame settings to transmit. More details
are elaborated below.
There are two options for frame length: Random
and Fixed.
The bytes of frame length range from 60 to 1514
without CRC.
There are eight types of frame pattern to choose
from: 7 pre-set ones and Random as left display.
Scroll down to click mouse to complete choosing.
Set up the numbers of frame count in bit-time in
this task.
Set up frame gap in bit-time for the task.
In order to send packets every certain period of
time, choose ON for duration.
Assign the number of seconds to determine the
interval to send packets.
Assign time limit in seconds for every
transmission.
These four additional settings help to enforce advanced frame functions.
Transmit by
Sequence
refers to transmit frames one by one,
Enable X-Trailer Check
enables
data integrity checking with X-trailer and it is the checksum computed on the contents
of the frame.
Enable Trigger
is to add a trigger in the Tx frames, and
Enable Pause
Control
enables the “flow control”.
Check the boxes to activate the corresponding functions.
