Duo-Lux
Nightlight Mode:
Place the torch into the charging cradle and
switch the power on. The 6 LED front facing
nightlight will automatically be set to motion
sensor mode and turn on during darkness when
movement is detected. (Default mode)
With the torch resting in the charging cradle,
press the push button on the side once to activate
the Nigh Motion Sensor mode (the front
LEDs will light up to show this has activated). The
6 LED front nightlight will turn on automatically in
the hours of darkness, and it will become brighter
when movement is detected.
To return the Duo-Lux to motion sensor mode,
simply press the side button once again while the
torch is resting in the cradle.
Sensor Delay Time: 20+/-5s
Sensor Distance: 3 - 4 metres
Power Failure Mode:
The 5 LED torch automatically turns on during a
power failure at a low light setting. To activate the
full brightness remove the torch from the cradle
and press the side button once.
Torch Mode:
To activate torch mode remove the torch from the
cradle and press the side button once.
While the torch is out of the cradle use the
3
position push button to toggle the Top 5 LED
torch ON / Front Task Light ON/ Torch OFF.
Induction charging methods
Rechargeable Li-ion 500mA
battery
• Automatically turns on when the power goes out
• Dual nightlight feature with Dusk to Dawn and Motion Sensor options
• Torch simply slides in and out of charging cradle
• Induction charging technology
• Rechargeable Li-ion 500mA battery
• Batteries and LEDs never need to be replaced, and LEDs are always cool to the touch
• Modern Design
• Charge lasts up to 8 hours on Lo and 2 hours on Hi
• Front Work Light lasts 8 hours
• Sensor delay time 20 +/- 5s
• Sensor distance 3-4 meters
• Torch with 5 super bright LEDs - Hi: 60 Lumens Lo: 10 Lumens
• 6 LED Nightlight - Dusk to Dawn: 1 Lumen, Sensor: 20 Lumens
• Lightweight and durable
Place the unit and cradle into
a mains plug and switch on.
This will start charging your
unit.
Nightlight modes will be
active during hours of
darkness.
To switch between the
nightlight modes, press the
side push button while the unit
is plugged in and switched on.
To use as torch just take the
unit out of the charging
cradle.
1
3
4
2
Do not operate with a damaged charger or if the
appliance has malfunctioned or been damaged in
any manner.
Do not allow children to play with the packaging
materials.
Important Information
When using electrical appliances, in order to
reduce the risk of fire, electric shock, and/or
injury to persons, basic safety precautions
should always be followed.
For your safety...
Read all instructions carefully, even if you are
familiar with the appliance.
Do not use this appliance/charger if it appears
to be damaged
Do not look directly into the light source or
point it into the eyes of others. This can lead to
retinal damage.
Charge the light only with the charger provided
Do not throw the charger into fire and do not
expose it to extreme heat. The charger could
explode or burst.
Do not attempt to alter or manipulate the
charger in any way. Doing this increases the
exposure to danger significantly.
This appliance is not watertight and is
unsuitable for use in damp
environments.
This is not a toy. Close attention is necessary
when used near children.
Do not use with a damaged outlet.
Do not handle charger with wet hands.
Do not immerse the appliance or charger in
water or any other liquid.
Do not attempt to use the charger with any
other product.
Only plug the charger into a standard electrical
outlet. Not to be used with
extension cords.
Features of your NiteSafe
TM
MUST BE CHARGED FOR 24 HOURS BEFORE INITIAL USE
