Specifications
Supply Voltage:
18–30 VDC
Power Consumption @ 24 VDC:
No Display or Programmer
Detector Termination Card
Detector Mounting Box
Aspirator @ 3000 rpm Aspirator @ 4200 rpm
Quiescent
With Alarm
Quiescent With Alarm
Power
5.8 W
6.96 W
8.16 W
9.36 W
Current
240 mA
290 mA
340 mA
390 mA
Dimensions (WHD):
13.8 in x 8.9 in x 4.9 in (350 mm x 225 mm x 125 mm)
Weight:
9 lbs (4.0 kg) including Display and Programmer modules
IP Rating:
IP30
Operating Conditions:
Tested to: 14°–131°F (-10°C–55°C)
Detector Ambient: 32°–103°F (0°C–39°C) (Recommended)
Sampled Air: -4°–140°F (-20°–60°C)
Humidity: 10%–95% RH, non-condensing
Please consult your Xtralis office for operation outside
these parameters or where sampled air is continually
above 0.015% obs/ft (0.05% obs/m) under normal
operating conditions.
Sampling Network:
Aggregate pipe length: 650 ft (200 m)
Maximum Single Length: 325 ft (100 m)
Pipe Modelling Design Tool: ASPIRE2™
Pipe Size:
External Diameter 1 in (25 mm)
Internal Diameter
9
/
16
in–
7
/
8
in (15–21 mm)
Programmable Relays:
7 Relays, Contacts rated 2 A @ 30 VDC NO/NC Contacts
Cable Access:
8 x 1 in (25 mm) knockouts in various positions
Cable Termination:
Screw terminals 30–12 AWG (0.2–2.5 sq mm)
Alarm Sensitivity Range:
0.0015%–6.25% obs/ft (0.005%–20% obs/m)
Alarm Threshold Setting Range:
Alert:
0.0015%–0.6218% obs/ft (0.005%–1.990% obs/m)
Action:
0.0031%–0.6234% obs/ft (0.010%–1.995% obs/m)
Fire 1: 0.0046%–0.625% obs/ft (0.015%–2.00% obs/m)
Fire 2: 0.0062%–6.25% obs/ft (0.020%–20.00% obs/m)*
*Limited to 4% obs/ft (12% obs/m) in UL mode
Event Log:
Up to 18,000 events stored on FIFO basis.
AutoLearn:
Minimum 15 minutes, maximum 15 days. Recommended
minimum period 1 day. During AutoLearn thresholds are
NOT changed from pre-set values.
Software Features:
Referencing: Compensation for external ambient
conditions.
Four Alarm Levels: Alert, Action, Fire 1 & Fire 2.
Two Fault Warning Levels: Maintenance and Major fault.
Software Programmable Relays: 7.
Maintenance Aids: Filter & Flow monitoring.
Event reporting via VESDAnet or Event Log.
Ordering Information
Xtralis VESDA VLP
VLP-0XX XX (see below)
Remote Programmer
VRT-100
Recessed Mounting Kit (Optional)
VSP-011
Hand-held Programmer
VHH-1000
19 in Sub Rack Configuration
contact Xtralis
Dimensions
in
mm
A
13.8
350
B
8.9
225
C
2.75
70
D
2.25
57
E
1.37
35
F
1.75
44.5
G
0.87
22.0
H
5.56
14.1
I
0.62
15.9
J
1.31
33.3
K
1.33
34
L
0.94
23.8
M
2
51
N
0.83
21
O
5.56
141
P
1
25.4
Q
0.44
11.1
R
0.37
9.5
S
1.12
28.5
T
1.19
30.2
U 0.125
3.2
Doc. no. 11641_10
The contents of this document are provided on an “as is” basis. No representation or warranty (either express or implied) is made as to the
completeness, accuracy or reliability of the contents of this document. The manufacturer reserves the right to change designs or specifications
without obligation and without further notice. Except as otherwise provided, all warranties, express or implied, including without limitation any
implied warranties of merchantability and fitness for a particular purpose are expressly excluded.
This document includes registered and unregistered trademarks. All trademarks displayed are the trademarks of their respective owners.
Your use of this document does not constitute or create a licence or any other right to use the name and/or trademark and/or label.
This document is subject to copyright owned by Xtralis AG (“Xtralis”). You agree not to copy, communicate to the public, adapt, distribute, transfer,
sell, modify or publish any contents of this document without the express prior written consent of Xtralis.
www.xtralis.com
The Americas
+1 781 740 2223
Asia
+852 2297 2438
Australia and New Zealand
+61 3 9936 7000
Continental Europe
+41 55 285 99 99
UK and the Middle East
+44 1442 242 330
Part: 18253
Xtralis
VLP
®
VLP-0XX XX
0=Blank Plate
1=Programmer
2=Display
4=Scanner Display
0=Standard Detector Orientation
1=Inverted Detector Orientation
0=Standard Product
1=Custom (consult factory)
Detector Configurations
