MP-10000
www.xtpower.de 140617
Battery Indicator:
-
Press of the switch button (on / off) which turns on the power
bank and gives you a charge indication
-
The 4 LEDs indicate the current state of charge.
More lit LED’s,
indicate a higher state of charge.
-
The LED’s turn off after 3 sec
.
Charging the Power Bank:
-
Your Power Bank comes partially charged. Please charge the
new power bank completely before using.
-
Connect the powerbank with the power adapter using the DC
Input and connect with a power line.
-
The active charging function is indicated by a flashing LED. The
number of lit LEDs shows the current charge level of the power
bank during charging.
-
Don’t
store the power bank in fully discharged state for long
periods of time, please recharge from time to time.
Charge your mobile device using USB jack (OutS / OutI):
-
Take the USB plug of the supplied USB cable and connect it to
the USB port of the power bank.
-
Connect the USB cable with your device choosing the correct
adapter.
-
You can also use the original USB cable of your device in case
your device needs a different connector.
-
Briefly press the switch button (on / off), your mobile device
will now be charging.
-
When your device is fully charged (<50mA charging current) or
the Power Bank is not being used, the Power Bank switches off
automatically.
Load your mobile device via the DC jack (Output)
First select with the switch mounted on the side the required voltage
(9V/12V).
! Important: Choose the correct output voltage of 9V or 12V before
connecting the device to be charged, as this can be damaged if you
choose the wrong voltage.
- Connect the round plug adapter cable with power bank (output).
- Find the appropriate connector for your device and connect it to
the cable.
- Turn on the power bank as described above
- Your device is now loaded. The four LEDs on the Power Bank indicate
the current charge status of the Power Bank.
- once your device is fully charged (<50mA charge current) or the
capacity of the power bank is used up, the power bank will
turn off automatically.
If consumers are connected to draw a current that is above the
specified values, the power bank will turn off for security reasons.
If consumers are connected which only need a small current which is
below the current of the charger used to detect the end of charge,
then the current will also turn off after a short time and the device
unfortunately cannot be loaded or operated with this power bank.
