Xtool RA2, Руководство пользователя

Страница: 42 / 43

42
15
2.5mm 2mm
Statement
■ Thank you for choosing the xTool products!
■ If you use the product for the first time, read carefully all the
accompanying materials of the product to improve your experience with it. If
you do not use the product according to the instructions and requirements
of the Manual, or mis-operate the product due to misunderstanding,
etc., Makeblock Co., Ltd. shall bear no responsibility for any loss resulting
therefrom, except for losses caused due to improper installation or operation
by Makeblock professional maintenance personnel.
■ Makeblock Co., Ltd. has collated the content of the Manual rigorously and
carefully, but errors or omissions may remain.
■ Makeblock Co., Ltd. is committed to continuously improving product
functions and service quality, and therefore reserves the right to change any
product or software described in the Manual and the content of the Manual
at any time without prior notice.
■ The Manual is intended to help you use the product properly and does not
include any description of hardware and software configuration. For product
configuration, refer to the related contract (if any) and packing list, or consult
your distributor. Images in the Manual are for reference only and the actual
product may vary.
■ Protected by copyright laws and regulations, the Manual shall not be
reproduced or transcribed in any way, or be transmitted on any wired or
wireless network in any manner, or be translated into any language without
the prior written authorization of Makeblock Co., Ltd..
After-sales services
For technical support, contact us through support@xtool.com .
For more information about after-sales services, visit support.xtool.com .