EZ500 Diagnosis System
2
Operation Instructions
For safe operation please follow the instructions below:
Keep the scanner away from heat or fumes when using it.
If the vehicle battery contains acid, please keep your hands and skin or fire sources away from the
battery during testing.
Exhaust gas of vehicle contains harmful chemicals, please ensure adequate ventilation.
Do not touch the cooling system components or exhaust manifolds when engine is running due to the
high temperatures reached.
Make sure the car is securely parked, Neutral is selected or the selector is at P or N position to prevent
the vehicle from moving when engine starts.
Make sure the (DLC) diagnostic link connector is functioning properly before starting the test to avoid
damage to the Diagnostic Computer.
Do not switch off the power or unplug the connectors during testing, otherwise you may damage the
ECU and/or the Diagnostic Computer.
Please use common USB Cable or original charger. Otherwise, it may result to danger. When you use a
charger for charging, adapter shall be installed near the equipment and shall be easily accessible.
Manufacturer of Power Adapter: Shenzhen Mingxin Power Technologies Co.,Ltd.
Parameters of Power adapter: Input: AC 100-240V 50-60Hz 1A; Output: DC 12V 3A.
Declaration of Conformity
Hereby, XTOOLTECH declares that this EZ500 is in compliance with the essential requirements and
other relevant provisions of directive 1995/5/EC.