6
7
-15A
-
FUSE
15A DC12/24V
DC12/24V
OPERATING YOUR FRIDGE
/ FREEZER WITH 240V AC
POWER
This fridge/freezer is 12V/24V DC operated.
Included with this fridge/freezer is a 240V AC
to 12V DC adaptor so that you can conveniently
operate from mains 240V AC power.
To use;
1 Plug the 240V AC adaptor into main (240V AC)
power point.
Do not use extension cords as this may damage the
adaptor and/or fridge/freezer.
2 Plug the 12V DC plug into the fridge socket
3 Your fridge / freezer will turn on automatically.
POWER REQUIREMENTS
The fridge/freezer is designed to operate on DC
voltage.
+ DC input 12V or 24V DC (e.g. car cigarette
lighter or car battery).
+ If the fridge/freeze is operating when the vehicle
ignition is switched OFF, the fridge/freezer will
switch OFF automatically when the power source
voltage falls below the Battery Protection cut-out
setting.
+ The fridge/freezer will automatically switch back
ON when the vehicle is re-started and the power
source voltage reaches the Battery Protection
cut-in setting.
OPERATING YOUR FRIDGE/
FREEZER WITH 12/24V DC
+ Plug the 12V/24V DC power cord into the DC
power socket (as highlighted over page) on the
end of the fridge/freezer and then connect to the
vehicle cigarette lighter socket or suitable 12V or
24V DC power source.
+ The fridge/freezer will automatically turn on,
there is no requirement to switch the appliance
on.
+ The display will automatically show the current
internal cabinet temperature.
+ For optimum performance and efficiency, it is
important that the fridge/freezer has a reliable
DC power source available. Direct connection to
the battery is recommended and reduces the risk
of voltage dropping to the appliance.
+ Use only the 1.5m DC power cord supplied with
the fridge/freezer.
IMPORTANT: If a DC extension cord is required we
recommended use of a 6mm dia. (AWG11) 4.58mm2
Twin Sheath Two Core cord with direct connection to
the positive and negative battery terminals with 15A
inline fuse protection.
+ The fridge/freezer is equipped with an electronic
control system that will prevent polarity reversal.
In the event that the battery connection is
reversed the unit will not start or operate. The
power input socket is fitted with a 15A blade fuse
for protection.
DC POWER CORD
12-24V DC POWER INLET