XTM CFR1001XTM, Руководство пользователя

Страница: 5 / 14

4 5
INSTALLATION
After unpacking the fridge check that no parts
are missing. Place the unit in a dry place which is
protected against splashing water. Do not place
directly adjacent to sources of heat such as heating,
gas ovens, hot water, pipes or directly in the sun.
It is important that your appliance is installed and
operated in accordance with these instructions to
ensure its performance, efficiency and operation.
APPLICATION AND OPERATIVE
COOLING RANGE
The cooling compartment has varying temperature
zones. The values indicated on the digital display are
related to the middle of the cabinet. The Single Zone
Fridge is designed to either refrigerate or freeze
food. The fridge may be used for outdoor use such
as for camping purposes. If you wish to refrigerate
medicines, first check to ensure the fridge’s cooling
capacity meets the demands of the respective
medicines. The fridge is designed to operate in
ambient temperatures between -10° and +55° C
in a maximum air humidity of 90%. The fridge can
operate continuously at a maximum angle of 30°.
Level operation is preferable.
NOTE: The normal operation of the appliance
requires heat to be radiated away from the
condenser located at the end of the cabinet.
Adequate airflow is required around the compressor
at all times. (Fig. 1).
The cooling system has been designed to operate
correctly when the appliance is positioned on angles
up to 30 degrees. It is recommended that the time
the unit is exposed to angles over 30 degrees is
limited to a maximum of four (4) hours continuous
operation. (Fig. 2).
FIG. 1 Air Flow
FIG. 2