Step
4
:
1. Assemble the cover onto the shroud
2. Screw three buttons outside up
f) Shroud Cover
g)Screws
f
g
g
g
Step
5
:
1. Install the auxiliary handle base to the
side of the gear box.
2. Screw it tightly
h
i
h)
Auxiliary handle base
Step
6
:
Place the auxiliary handle to the base
.
i)
Auxiliary handle
Maintenance
1. Before each use, clean off the drive shaft. Make sure it has no dirt, grease, or debris
clinging to it
2. All that is required to keep the attachment in excellent working condition is to wipe it
down after each use to clear away any debris and particles.
3. Store it in a cool, dry location, out of reach of children.
Step
2
:
1. Assemble the Metal Shroud to the right position and
screw it with the hex wrench
2. Make sure the locating pin is consistent with your
grinder’s clamp
c)
Metal shroud
c
Step
3
:
1. Add the wheel to the shaft and then the washer on
the top.
2. Screw it tightly
d) Burnishing wheel
e) Washer
d
e
