After refilling, hold the chain saw away from the tree. Start it and wait until lubrication on saw chain is
adequate.
NOTICE: When filling the chain oil for the first time, or refilling the tank after it has been completely
emptied, add oil up to the bottom edge of the filler neck. The oil delivery may otherwise be impaired.
NOTICE: Never use oil including dust and particles or volatile oil.
NOTICE: When pruning trees, use botanical oil. Mineral oil may harm trees.
NOTICE: Before the cutting operation, make sure that the provided oil tank cap is screwed in place.
WORKING WITH THE CHAIN SAW
CAUTION: The first time user should, as a minimum practice, do
cutting logs on a saw-horse or cradle.
CAUTION: When sawing precut timber, use a safe support (saw
horse or cradle). Do not steady the work piece with your foot, and
do not allow anyone else to hold or steady it.
CAUTION: Secure round pieces against rotation.
CAUTION: Keep all parts of the body away from the saw chain
when the motor is operating. CAUTION: Hold the chain saw
firmly with both hands when the motor is running.
CAUTION: Do not overreach. Keep proper footing and balance at
all times.
NOTICE: Never toss or drop the tool.
NOTICE: Do not cover the vents of the tool.
Bring the bottom edge of the chain saw body into contact with the
branch to be cut before switching on. Otherwise it may cause the
guide bar to wobble, resulting in injury to operator. Saw the wood
to be cut by just moving it down by using the weight of the chain
saw.
If you cannot cut the timber right through with a single stroke:
Apply light pressure to the handle and continue sawing and draw
the chain saw back a little; then apply the spike bumper a little
lower and finish the cut by raising the handle.
Bucking
1. Rest the bottom edge of the chain saw body on the wood to be
cut
