XTline XT102775, Руководство пользователя

Страница: 26 / 27

To switch off the display indicator , press the ON/OFF button 5 for 3 seconds.
NOTE
The compressor will not work if the display indicator is switched off.
Setting the pressure
Hold down the "+" or "–" button until the display flashes.
Press the "+" or "–" button to set the desired pressure.
Once you see the desired pressure on the display indicator , do not press any button for about 3 seconds.
The desired pressure is now set.
NOTE
The display indicator (and thus the compressor) switches off after around three minutes of inactivity.
TIP
If you press and hold the "+" or "–" button, the pressure changes quickly.
Initial operation
Loosen the cap nut (do not unscrew it completely!), twist in the compressed air hose threaded connection
13 and retighten the cap nut .
Select the desired pressure.
Put one of the supplied adapters (7/8/9/10/11/12) onto the compressed air hose adapter 15.
Press down the lock on part 15.
Connect the adapter (7/8/9/10/11/12) to the object to be inflated.
Press the ON/OFF switch .
The compressor switches off automatically when you reach the preset pressure.