XTline XT102720, Руководство пользователя

Страница: 21 / 25

safer at the rate for which it is designed.
3. Do not use tool if switch does not turn it on of off. A tool that cannot be controlled with the switch is
dangerous and must be repaired.
4. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users
5. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp
cutting edge are less likely to bind and are easier to control.
6.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool’s operation. If damaged, have the tool serviced before
using .Many accidents are caused by poorly maintained tools.
7.
Use only accessories that are supplied with your model. Other accessories that may not be
suitable for this tool and may create a risk of injury when used.
Specific safety rules
1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool
may contact hidden wiring .Contact with a “live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
2. keep hands clear of moving parts .
3. Do not touch moving parts, Allow the power tool accessories (bit and blades etc)to cool before
touching them .They can become extremely hot during use and can burn your skin.
4. Always wear protective safety glasses when operating power tools. Wear a face mask when
environment is dusty .