XTline R7401, Руководство пользователя

Страница: 40 / 43

08
> Do not use AC only rated tools with a DC power supply. While the tool may
appear to work, the electrical components of the AC rated tool are likely to
fail and create a hazard to the operator.
> Keep handles dry, clean and free from oil and grease. Slippery hands cannot
safely control the power tool.
> Only use “wrap around” control handle, supplied with tool. Use of an auxiliary
side handle will cause the hand to be within reach of the spinning accessory.
> Use clamps or other practical way to secure and support the work piece to a
stable platform.Holding the work by hand or against your body is unstable
and may lead to loss of control.
> Develop a periodic maintenance schedule for your tool. When cleaning a tool
be careful not to disassemble any portion of the tool since internal wires may
be misplaced or inched or safety guard return springs may be improperly
mounted. Certain cleaning agents such as gasoline, carbon tetrachloride,
ammonia, etc. may damage plastic parts. Risk of injury to user.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer,birth defects
or other reproductive harm.Some examples of these chemicals are:
> Lead from lead-based paints,
> Crystalline silica from bricks and cement and other masonry products, and
> Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
ASSEMBLY (please refer to picture on diagram in page 2)
Before any work on the machine itself, pull the mains plug.
Handle
Operate your power tool only with the auxiliary handle (D).
Screw the auxiliary handle (D) on the left or right of the machine head depending
on the working method.
Mounting the Polishing Tools
Clean the polisher spindle (E) and all parts to be mounted. For clamping and
loosening the polishing tools.