and disconnect the chuck from the spindle.
To install a quick-release cartridge, you need to pull the release sleeve in the direction indicated
by the arrow, and without releasing the sleeves, set the cartridge to the spindle.
Release the sleeve and make sure the cartridge is securely locked.
FIG 2.
Installing replaceable nozzles in a bit holder (Figure 3) with the removed cartridge, the tool serves
as a battery-operated screw driver. The bits in the holders are fixed with a magnetic holder.
To install the bits it is necessary to insert it into the bit holder and to make sure the reliability of
its fixation.
Fig 3
Tailings of removable nozzles must be clean: without traces of grease and metal shavings. Before
installing the nozzle, it must be cleaned. Dirt and a metal chip can reduce the magnetic content bit holder.
Installing the drill
With a mounted cartridge, the tool performs the function as a cordless drill. To install the drill you need to