Model
XE570S
Service
Replacing Parts
Parts
9 Flywheel
Rev.
Procedures：
4.
To resume the Flywheel, return the
Belt onto grooves on the Flywheel and
return
the
Flywheel
onto
the
mainframe.
5.
Tighten both 3/8" -UNF26 x 9T nuts
6.
Return the steel cable onto the
Flywheel (with 45 degree) and then
return the Idler Wheel Assembly, as
shown in figure 5.
7.
Turn the Drive Pulley and check if the
belt is secured. Adjust both
3/8"-UNF26 x 4T nuts to position the
belt in the middle on the Drive Pulley
and then tighten all other screws.
Adjust the Belt to a proper tension, as
shown in figure 6.
8.
Follow procedures 7, 6, 5, 4, 3 and 2 to
return other parts.
5
6
