TR800 Treadmill
13
The Pulse (Heart Rate) readout will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors on the side hand rails to
display your pulse. Pulse value displays anytime the upper display is receiving a Pulse
signal. You may not use the Grip Pulse feature while in Heart Rate Control.
Pulse Grip Feature
Displays the cumulative calories burned at any given time during your workout.
Note
: This is only a rough guide used for comparison of different exercise sessions, which
cannot be used for medical purposes.
Calorie Display
1. Display will automatically turn off (go to sleep) after 30 minutes (no key operations). The
treadmill will draw very little current in sleep mode (about as much as your television when
it is turned off).
2. Remove tether cord.
3. Turn of the main switch on the front of the treadmill, below the motor cover.
You are able to set your speed and incline settings quickly by using the quick keys on the
console. Just press either Speed or Incline, then select 2 or 3 digits, then press Enter and the
treadmill will automatically adjust to that value. This saves time because you don’t have to
press and hold or hold a button down until reaching the desired value. The maximum value
you may input for speed is 12.0 mph and incline level 15. Speed values can be entered in .1
mph increments and Incline in 1.level increments.
To Turn Treadmill Off
Quick Speed & Incline Buttons
Examples:
Press the Quick Incline button, then 1, 0 = Incline Level 10
Press the Quick Incline button, then 0, 3 = Incline Level 3
Press the Quick Speed button, then 8, 0 = 8.0 mph or kmph
Press the Quick Speed button, then 0, 8 = 0.8 mph or kmph
