10
ERG400 Rower
Handlebar, Seat, Pedals & Console
4
Hardware Step 4
1. Remove the pre-assembled Rubber Foot (
82
) and Phillips Head Screw
(
83
) from both sides of the end of the aluminum track.
2. Slide the Seat (
30
) onto the Aluminum Track (
2
). Be sure of the correct
orientation of the Seat (
30
).
3. Implement one of Axle Bushings (
91
) on the Pedal Stopper Shaft (
58
)
going through the Main frame (
1
) and cover with Lever Sleeve (
59
).
4. Pierce the Pedal Axle (
8
) through the Main frame (1) and put on two
Axle Bushings (
73
) and Pedals (
72
) on both ends (make sure pedals are
correct for each side) and use Combination M5 Allen Wrench & Phillips
Head Screw Driver (
97
) to tighten the shaft with two Flat Washers(
69
)
and two Button Head Socket Bolts(
92
).
Parts Pre-Assembled
on Machine.
