Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
12
Gripped pulse
Display’s the user’s current heart rate in beats per minute during the
workout.
Both hands must hold the gripped pulse for a heart rate reading during your
workout.
You may preset your target pulse. The computer will alarm to remind you
as soon as your current heart rate has achieved at the preset figure.
Note: This data is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes.
Pulse Recovery:
Your computer is equipped with a recovery program to monitor your heart
rate recovery. After your workout, press the recovery button and keep both
hands on the gripped pulse. The computer will cease monitoring all
functions except time which will commence countdown from 00:60 to 00:00.
Once zero is reached the pulse function will display a grade between F1 to
F6. F1 being the best and F6 being the worst reading you can receive.
Press the recovery button to return to the main display.
Note: If no pulse signal input then the computer will show “P” on the PULSE
window. If the computer shows “ERR” on the message window, please re-
press the PULSE RECOVERY key and please make sure your hands are
keeping well on the grips or the chest transmitter is attached well.
DISTANCE BAR Every bar indicates 0.1 mile.
SPEAKER:
To listen to an MP3 during your workout, connect the MP3 to the monitor (6)
by using the audio wire (77). Volume is controlled by the MP3 player.
PROGRAM
:
Displays the program level from P1 to P23
P1 –Manual you can control the tension level
P2 to P13 programs are preset at the factory.
P14 to P17 programs are user setting
P18 to P22 programs are heart rate control programs
P23 body fat program
Note: Install the 4 rechargeable batteries. If batteries are not inserted the
monitor will display P1 to P24.
Remarks
1. The cycle is a self-generating power system. The monitor will only function while you are
pedaling. Once you stop pedaling the monitor will shut off after 100 seconds. All values
will be reset to zero except for your saved user programs.
You will need to start pedaling before 30 seconds to keep your inputted data.
2. Monitor takes four AAA rechargeable batteries. Batteries are needed for the pulse
recovery program
3. To listen to an MP3 during your workout, connect the MP3 with the computer (6) by using
the audio wire (77).
