Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
19
MAINTENANCE
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the reed switch should be adjusted. To
adjust the reed switch, the chain cover (42) must first be removed.
Remove the quick release knob (11), seat post cover (17) and seat post (7).
Remove the left pedal (10) from the crank (38).
Remove the two self-tapping screws (45) from each side of chain cover (42). Remove
another seven ST5 x 15 self-tapping screws (40) from left chain cover (42L). Remove the
crank cover (43) from the chain cover (42). Hold the chain cover (42) near the back and pull it
apart slightly until the chain cover can be lifted off the ends of the crank (38).
Do not pull the
chain cover apart at the top or the seam may be broken.
1
9
10
38
45
40
40
40
40
40
40
45
17
11
7
Next, locate the sensor wire (57). Turn the pulley until the magnet is aligned with the reed
switch. Loosen, but do not remove, the ST5 x 15 screw (40). Slide the reed switch slightly
toward or away from the magnet. Make sure that the magnet will not hit the reed switch.
Retighten the screw (40). Turn the pulley for a moment. Repeat until the console displays
correct feedback.
51
40
57
When the Reed Switch is correctly adjusted, reattach the Chain Cover and the Crank Covers.
