XtendLan XL-NAS-2800SS Скачать руководство пользователя страница 65

Страница: 65 / 124

NAS System

User Manual

PDC/ADS Mode

– Select the mode type of the domain server. This can be

“ADS Windows 2000/2003 Server)” or “PDC (Windows NT Server)”.

Enable NTLMv2 Authentication

– This parameter determines whether or

not smbclient will attempt to authenticate itself using the NTLMv2

encrypted password. If enabled, NAS will only sent NTLMv2 and LMv2

responses. NTLMv2 authentication protocol is available only on

WindowsNT4 with SP4 and Windows 2000 or later. Default is disabled.

Enable Client Channel -

This controls whether the client offers or even

demands the use of the netlogon schannel. Default is auto, means it

offers the schannel but does not enforce it.

Reset –

Use this button to undo or clear any changes made.

Save –

Use this button to save the changes made.

5. Click “Save” when done.

NOTE: When NAS is successfully joined to the Windows domain, the
domain user accounts will appear in Account list.
NOTE: The NAS cannot be joined to the Windows domain if NASVG

does not exist (NASVG is not yet initialized).

Содержание XL-NAS-2800SS





























































































































Результаты поиска

Содержание XL-NAS-2800SS

Отзывы:

Бренды по названию

Популярные бренды

XtendLan XL-NAS-2800SS, Руководство пользователя

Результаты поиска

Содержание XL-NAS-2800SS

Отзывы:

Бренды по названию

Популярные бренды