3.4
Hardware
Connections
1. Select a convenient location for the bridge near the PC or Ethernet device to which it will be
connected. The bridge should be kept away from excessive heat.
2. Using one coaxial cable to connect the
HCNA
port to F-Type connector on the wall. Using
another coaxial cable to connect the other F-type
TV
port to TV set.
3. Connect the
LAN1/LAN2
port to your Ethernet- equipped device.
4. Connect the power adapter to the
DC5V
port into a wall outlet.
The figure above shows how to connect an xDSL modem to a home coaxial cable network. Follow
the same steps to connect any Ethernet device such as a HUB or printer, to a coaxial cable network.
Now you should have connected the
LAN
port,
HCNA
port and the
DC5V
port to the
appropriate devices or lines. LED will be as:
POWER ON
LAN Link/Act ON
HCNA Link/Act ON
For more information on LEDs, see section
"LED Indicators on the Front Panel"
4
TROUBLESHOOTING
The bridge has been designed to be a reliable and easy to use connection device. Please refer to the list
below to aid in troubleshooting.
The Power (green) LED is off.
e
Make sure the power adapter is properly plugged into a live electrical outlet.
The LAN(Ethernet) or HCNA Link/Act LED is off.
e
Make sure the connection to these two ports is secure.
e
The Ethernet or HCNA device to which you are connected should be powered on and properly
configured.
XtendLan XL-HC128C User's guide
______________________________________________________________________________________________________
www.xtendlan.com
6