CCTV testerPRO User
’
s Manual
Ver: STP28V1.1
Page.14
.
A. Protocol:
Select the protocol according to the protocol of the PTZ camera. Up to 21
popular protocols are available, like elco P, Pelco D, Samsung, Yaan, LiLin, CSR600 etc.
B. Port:
Select the communication port for the PTZ camera controlling (RS232/422/485)
C. Baud:
Select the baudrate according to baudrate of the PTZ camera.(150, 300, … , 19200bps)
D. Address: Set the ID
according the ID of PTZ camera (0~254).
E. Pan Speed:
Set the pan speed of PTZ camera (0~63)
F. TiltSpeed:
Set the tilt speed of PTZ camera (0~63)
G. Set PS:
Setup preset position (0~128)
a. P/T/Z the camera to desired position
b. Press SET key to enter PTZ controller submenu
c. Move the yellow cursor to “Set PS” and then press
or
key to select the preset
position number.
d. Press ENTER key to complete preset position setting or preset RETURN key to give up
preset position setting.
Tips: Press
or
key to accelerate the value changing.
H. Go PS:
Call the preset position. (0~128) The PTZ camera will go to the desired preset position.
a. Move the yellow cursor to “Go PS” and then press
or
key to select the preset
position number.
b. Press ENTER key to complete preset position calling or preset RETURN key to give up
preset position calling.
Tips: Press
or
key to accelerate the value changing.
The way of calling the OSD menu and preset of the PTZ camera may vary with control systems
from different manufacturers. Please read the operation manual of control system manufacturer
for details. The way of calling OSD provided for reference is calling preset-64.
a.
Move the yellow cursor to “PTZ controller” to enter PTZ controller mode
b.
Press SET key to enter PTZ controller sub-menu. Press
or
key to move
the yellow cursor to “Go PS”,
Содержание TESTPTZ251GD
Страница 1: ...TESTPTZ251GD USER S MANUAL CCTV TesterPro ...
