XtendLan SDOMEO4802701, Руководство пользователя

Страница: 24 / 26

7 Exception Handling
Issue Possible Reason Solution
Power on, no movement,
no image, indicator light
does not light
Power line connected wrong Correct it
Power damaged Replace
Blowout Replace
Power line be connected bad Check it
Power on, self check, has
image, can’ t control,
indicator light does not
flicker
The machine’ s address code or
baud rate is wrong
Reset
Protocol wrong Correct it
RS485 bus be connected wrong Check it
Camera can’ t reposition
itself. (camera can no
longer move)
Mechanical failure Repair it
Camera incline Correct it
Power is not enough Replace
Image is not stable Video line connected bad Check it
Power is not enough Replace
Image is dim Focus in manual state Operate the machine or adjust a
preset position
Dome is dirty Clean it
VIII. Address-Binary code chart
Matri Matri Matri
Binary System Code PELCO-D
PELCO-P
Binary System Code PELCO-D
PELCO-P
Binary System Code PELCO-D
PELCO-P
00000000 1 00010000 17 00100000 33
00000001 2 00010001 18 00100001 34
00000010 3 00010010 19 00100010 35
00000011 4 00010011 20 00100011 36
00000100 5 00010100 21 00100100 37
00000101 6 00010101 22 00100101 38
00000110 7 00010110 23 00100110 39
00000111 8 00010111 24 00100111 40
00001000 9 00011000 25 00101000 41
00001001 10 00011001 26 00101001 42
00001010 11 00011010 27 00101010 43
00001011 12 00011011 28 00101011 44
00001100 13 00011100 29 00101100 45
00001101 14 00011101 30 00101101 46
00001110 15 00011110 31 00101110 47
00001111 16 00011111 32 00101111 48