XtendLan H PG series Скачать руководство пользователя

Страница: 46 / 150

here does not include the latch time. During the alarm process, the alarm signal can begin

an anti-dither time if system detects the local alarm again. The screen prompt, alarm upload,

email and etc will not be activated. For example, if you set the anti-dither time as 10 second,

you can see the each activation may last 10s if the local alarm is activated. During the

process, if system detects another local alarm signal at the fifth second, the buzzer, tour,

PTZ activation, snapshot, record channel will begin another 10s while the screen prompt,

alarm upload, email will not be activated again. After 10s, if system detects another alarm

signal, it can generate an alarm since the anti-dither time is out.



Show message: System can pop up a message to alarm you in the local host screen if you

enabled this function.



Alarm upload: System can upload the alarm signal to the network (including alarm centre)

if you enabled current function.



Send email: System can send out email to alert you when alarm occurs.



Record channel: you can select proper channel to record alarm video (Multiple choices).



You need to set alarm record mode as Schedule in Record interface (Main Menu-

>Advanced->Record). Please note the manual record has the highest priority. System

record all the time no matter there is an alarm or not if you select Manual mode.



Now you can go to the Schedule interface (Main Menu->Setting->Schedule) to set the

record type, corresponding channel number, week and date. You can select the record

type:Regular/MD/Alarm/MD&Alarm. Please note, you can not select the MD&Alarm and

MD(or Alarm) at the same time.



Now you can go to the Encode interface to select the alarm record and set the encode

parameter (Main Menu->Setting->Encode).



Finally, you can set the alarm input as the local alarm and then select the record

channel. The select channel begins alarm record when an alarm occurred. Please note

system begins the alarm record instead of the MD record if the local alarm and MD

event occurred at the same time.



Latch: When the anti-dither time ended, the channel alarm you select in the alarm output

may last the specified period. The value ranges from 1 to 300 seconds. This function is not

for other alarm activation operations. The latch is still valid even you disable the alarm event

function directly. .



Tour: Here you can enable tour function when alarm occurs. System supports one-window

tour. Please go to chapter 5.3.9 Display for tour interval setup.



Snapshot: You can enable this function to snapshoot image when alarm occurs.



Video matrix: Check the box to enable this function. The video matrix output can display the

alarm video of current channel when there is an alarm signal.



Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs.



Snapshot: For snapshot operation, please refer to chapter 4.4.2.

Note:

The network alarm means the alarm signal from the TCP/IP. You can enable the network

alarm function via the net SDK. The network alarm does not have the device type; anti-dither and

alarm upload function. The rest items are the same.

Please highlight icon

to select the corresponding function. After setting all the setups

please click save button, system goes back to the previous menu.

Содержание H PG series























































































































































Результаты поиска

Содержание H PG series

Отзывы:

Похожие инструкции для H PG series

Бренды по названию

Популярные бренды

XtendLan H PG series, Руководство пользователя

Результаты поиска

Содержание H PG series

Отзывы:

Похожие инструкции для H PG series

Бренды по названию

Популярные бренды