XtendLan GONU14RS, Руководство пользователя

Страница: 10 / 37

GONU14RS User
’
s manual www.xtendlan.com
7

CCCA standard

IEEE802.3ah-2004

IEEE802.3u

IEEE802.1Q

IEEE802.1D

IPv6
 SNMP V1/V2
 SIP RFC3261/3262/3263/3264/3265

G.711, G.726, G.729 voice coding

RFC2833 DTMF

T.38, G711 FAX pass-through mode
2
Hardware Installation
2.1 Power Interface
The GONU14RS uses special external power adapter of 12 V DC.
2.2 PON Interface
The optical interface of the GONU14RS is an SC/APC interface and is on the
right of the rear panel. During setup, remove the plastic dust cap of the SC/APC
interface and keep it well for future usage. Clean the SC/APC connector of the
fiber line with absolute alcohol and insert the SC/APC connector into the SC/APC
interface. If there is a clear “da” sound, the connection is correct. Otherwise,
remove the fiber connector and try again.
Perform the preceding operations at the PON interface every time you use the
ONU. If the ONU is not in use, cover the optical interface of the ONU with the
plastic dust cap, to prevent dust or other waste from falling into the optical
interface, which may cause ONU failure.
Caution: