-12-
Setting Ring-back Tone
If allow ring-back tone, press the call button to call monitor, a ring-back call tone can be heard
from door station.
There are 3 ring-back call tones,
Ringing one time
,
Ringing continuously
and
No ring-back
tone
.
Ringing one time is default, to change the setting, please follow the steps:
Setting Night View LED Illumination Mode
There are 3 working modes for night view LED indicator,
Normally on
,
Normally off
and
Auto
.
Auto is default, to change the setting, please follow the steps:
SETUP INSTRUCTIONS
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET
button
three
times
.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep+
Press
KEY_4
button to set
the night view LED mode
to
Normally on
.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep
Press
KEY_4
button again
to set the night view LED
mode to
Normally off
.
UNLOCK Indicator:ON
TALK Indicator:OFF
Buzzer
Beep, Beep,Beep
Press
KEY_4
button again
and again to set the night
view LED mode to
Auto
.
Press
KEY_4
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+, Beep
In standby mode, press
KEY_SET
button
four
times
.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep+
Press
KEY_1
button to set
the ring-back call tone ringing
one time.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep
Press
KEY_1
button again
to set the ring-back call tone
ringing continuously.
UNLOCK Indicator:ON
TALK Indicator:ON
Buzzer
Beep, Beep,Beep
Press
KEY_1
button again
and again to close ring-back
call tone.
Press
KEY_1
•
If setting mode has not been exited, you can change the night view LED illumination mode by pressing
KEY4 circularly.
•
The
LED_NAME
indicator will blink all the time until exit out the setting mode.
•
If without any operation in 10 seconds, it will exit out setting mode automatically.
•
In this step,press
KEY_SET
button twice to exit out the setting mode manually.
•
If setting mode has not been exited, you can change the ring-back tone by pressing KEY1 circularly.
•
The
LED_NAME
indicator will blink all the time until exit out the setting mode.
•
If without any operation in 10 seconds, it will exit out setting mode automatically.
•
In this step,press
KEY_SET
button once to exit out the setting mode manually.
