3.
INTERCOM FUNCTION
need indoor monitor support this function
4. MULTI OUTDOOR STATION
4.1. address should set to by DIP switch (details as above said) and the most quantity is
seven outdoor station can support ( include the master door station)
4.2. any of the door station can call the indoor monitor, but if one of the door stations is
contact with indoor monitor(audio phone), the other door station can not make a call,
there will be a sound of beep: BP+, BP+
5. DPA-MRMDS:
5.1. Single DPA-MRMDS connection (DPA-MRMDS address by default):
5.1.1. master door station connect to VD/IN;
5.1.2. the second door station connect to CAM-1;
5.1.3. the third door station connect to CAM-2;
5.1.4. the fourth door station connect to CAM-3;
5.2. in multi door station mode, when door station call indoor monitor, if the indoor
monitor have monitor function, then the DPA-MRMDS will output video from master
door station
6. SET TO INDOOR MONITOR’S ADDRESS
6.1.1. power the door station and connect the monitor to the door station correctly, in
the standby mode, press “PA” button( in the door station), there will be a hint
sound ”BP+,BP+”,, and the indicator light of button will be close, that means it
come to program mode;
6.1.2. then in five seconds , press the “call” button from indoor monitor, (otherwise, it
will quit the program in 60seconds) ,the outdoor station will a hint sound, then do
as below:
6.1.2.1. chose one wanted number button on the door station
in two seconds
, that
means the buttons you chose will be the indoor monitor’s room number.
Waiting for about 5 seconds, if there is a long “D--------“ sound from the
Содержание DPC-511
Страница 1: ...DPC 511 Door station User s Guide...
Страница 7: ......
