Xtech VOXDOTS XTH-700, Руководство пользователя, Страница: 4 / 19

IV. Basic operation
4.1. Charging the case and earphones
Note:
- The case and earphones have internal, non-removable, rechargeable batteries.
Do not attempt to remove the battery as you may damage the device.
Pairing
Hands-free mode
Playback mode
Press and hold to enable the pairing mode (if the earphones
fail to automatically go into pairing mode).
Briefly press to answer and end an incoming call
Press three times to redial the last number called (on
supported devices)
Press and hold for about 1 second to reject or ignore an
incoming call
Press and hold for about 2 seconds to enable the voice
command feature on the device
Briefly press the right or left button to play and pause audio
Mode
Multifunction button
Function
Charging
Charging complete
Power on
The LED turns solid red
The LED turns off
Initially, the LEDs light up in blue on both earphones, then the
left earphone LED starts flashing red and blue. The right
earphone LED lights up in blue once every 5 seconds
Status
LED indicators on earbuds
Function
Power off
Pairing mode active
Left or right channel
enabled
Bluetooth
®
connection
Standby
Low battery
Incoming call/ Dialing
Phone is on active call
The LEDs glow red, before turning off completely
The LED on the right earphone tuns solid blue, and the
LED on the left one flashes red and blue alternatively
Blue LED lights up once every 5 seconds
When the device has paired, only the blue LED will blink once
every 5 seconds on both earphones
The LED on the right earphone stays solid blue and on the left
one, the LED stays solid red
Red LED blinks once every second
Blue LED lights up once every 5 seconds
Blue LED lights up once every 5 seconds
Status Function
Earphone multifunction buttons with LED status indicators: