3
4
Dimension (L*W*H):730*720*620(mm)
Input voltage:AC220V
Spindle power:1.8KW
Travel range:
Max speed:60,000rpm
Tool magazine capacity:6
Spindle cooling:water cooling
Processing time:
1-6 Operating Environment and Requirements
1.Power supply ground wire must be well grounded to prevent electric shock or fire
accident, and moreover, to reduce noise interference.
2.The engraving and milling machine should be placed on a smooth and solid working
table.
3.Distance from the machine’s four sides to walls should be more than 40 cm to ensure
good heat dissipation.
4.The vacuum cleaner vent must be installed in outdoor, and operators need to wear a
dust mask.
5.Using environment temperature: - 10
℃
to 40
℃
. It needs to ensure that equipment can
be used in this temperature range, preventing dysfunction of electrical components caused
by insufficient heat dissipation.
6.Using environment humidity: < 80%, frost-free.
7.Away from the source of vibration and high frequency launching devices (such as ultra-
sonic wave).
X-mill 300 4-axis engraving and milling machine is mainly composed of engine base,
linear motion mechanism, motor drive system, motion control system, circuit-pneumat-
ic-water control system, man-machine operating interface and shell body.
1-4 OPERATING PRINCIPLE
X-mill 300 4-axis engraving and milling machine can read processing files through an
external USB or network interface. The motion control system is responsible for interpreting
processing file information, transforming it into computer digital signal and sending it to the
motor driver, which controls the start-stop and speed of the motor according to the received
signal. The motor realizes all kinds of motions by connecting mechanism driven linear
mechanism and processing course through contact between high-speed rotating burs and
materials.
1-5 TECHNICAL PARAMETERS
Name:X-MILL300milling machine
Weight:150kg
Max power:2.2KW
Number of axis:4axis
Processing mode:double-use of dry and wet
Max feed rate:6000mm/min
Tool changing mode:automatic
Processing materials:
1-3 MAIN STRUCTURE
Premill abutment,glass ceramic,Resin,
PMMA,Zirconia
XYZ:125/130/80mm A:360°
(±20° .positioning processing)
Glass Ceramic:17mins,PMMA:12mins,
Premill abutment:25mins,Resin:15mins,
