10.
Verify operation of all lights and secure all installed cables with supplied cable ties and re-install vehicle parts
Operation:
The System uses momentary switches to activate. Press Right or Left Actuator accordingly. Will cancel
as follows.
Press 1 Second for Lane Change, will stay on approx. 8 Seconds / 10 Flashes
Press 2 Seconds for Slowing to Turn Corners, will stay on approx. 20 Seconds / 30 Flashes
Press 5 Seconds for Traffic Lights when stopping and waiting, will stay on approx. 75 Seconds / 110 Fl.
The Systems Automatic Self-Cancelling may be overridden/Shut Off at any time by pushing the activated switch.
Hazard Lights - press to activate and press again to deactivate, they do not self-cancel.
Optional
- The Tan wire next to the Turn Switch is for an optional Dash Indicator. When the ATS is activated it will
flash 12 VDC that can be attached to an Optional Dash Mounted LED Light. More Information can be found at
www.xtcinstall.com
We can be reached by email at
XTC Power Products
A Division of XTC Motorsports LLC
925 N McQueen RD. #101
Gilbert AZ 85233
480-558-8588
*
Disclaimer: This kit is intended for off road use only and XTC Motorsports claims no responsibility for its use. It is up to the purchaser to make sure
it complies with all Federal, State and Local laws. R1
Copyright © 2019 XTC MOTORSPORTS LLC, all rights reserved.
