xsto SCL170A, Руководство по эксплуатации

Страница: 30 / 44

28
Adjusting the direction of the climbing S
arm to ensure the support wheel could
touch the ground, preventing the SCL170A
from slipping during loading, keeping the
SCL170A power off during the loading
process.
Requirements for cargo placement: The
front and rear part should be close to the
back-board, and the left and right side
should be placed at the center of the
loading plate; The cargo's center of gravity
should not exceed the 2/3 position of the
plate and should be tied with straps.
6.2 Operation On Flat Ground
The SCL170A can use its handle to achieve
flat ground with its solid tires and caster
legs.
In case of uneven road, please tilt SCL170A
and use solid tires to move.
WARNING : The slope of the ground
should not be larger than 10 degrees,
otherwise there is a risk of tipping.