xsto CT420, Руководство по эксплуатации

Страница: 19 / 40

3.6.2
Initial position
Make sure the goods is fixed
securely, move CT420 to the edge
of the stairs and make sure the
two tracks lean against the edge of
the first stair. Turn on loading
board automatic adjustment mode
on handheld controller, set speed
1, go upstairs by tracks.
3.6.3
At the beginning of going upstairs
CT420 will walk slowly
before it finally gets off the
ground. Under loading board
automatic adjustment mode, the
process will slow down the move.
Under the manual control mode,
shift between “track walk” mode
and
“
loading board manual
adjustment” mode, make sure the
machine going up slowly, while
maintaining the balance of the
loading board.
3.6.4
Going upstairs smoothly
When CT420 gets off the ground
totally, it can go upstairs
smoothly, then cancel automatic
mode and turn to manual mode.
If CT420 goes upstairs unstably,
adjust manually the loading board
rotating angle according to