38
Document MT0605P.2018.E
© Xsens Technologies B.V.
MTi User Manual
Table 21: Pin Configuration table CA-MP2-MTi
Functionality
Wire colour
CA-MP2
Wire
gauge
Fischer
pin no.
Molex
pin no.
10-pins header
(OEM)
GND
Black
AWG28
1
2
4,8
RS232 TX / RS422_TxD- /
RS485 (TxD/RxD-)
Yellow
AWG28
2
4
5
RS232 RX / RS /
RS485 (TxD/RxD+)
Grey
AWG28
3
5
3
Vin (4.5-30V)
Red
AWG28
4
1
1
SyncIn
12
Blue
AWG28
5
7
2
SyncOut
Pink
AWG28
6
9
6
ClockSync
Brown
AWG28
7
8
10
USB DP (D+) / R
Green
AWG28
8
3
9
USB DM (D-) / RS422RxD-
White
AWG28
9
6
7
Shielding
SH
N/A
SH
N/A
7.3.1.3 GNSS Antenna
The MTi-G-710 requires an active patch antenna that can be connected to SMA connector in the front
panel of the MTi-G-710. See also
https://base.xsens.com/hc/en-us/articles/209434509
7.3.2 OEM connections overview
7.3.2.1 Power and data
All MTi’s are available as OEM-board as well. The connection from the OEM board to the push-pull
connector of the encased version is a flexible PCB, which has put to vibration test according to MIL-STD
202. The OEM board contains two headers, one 10-pins header and one 6-pins header. Details of the
headers are:
Table 22: Part numbers headers on MTi OEM
Description
Manufacturer Part number
5x2 (10 pins dual row) box header, pitch 1.27 mm Samtec
FTS-105-01-F-DV-P-K
3x2 (6 pins dual row) box header, pitch 1.27 mm
Samtec
FTS-103-01-F-DV-P-K
The two headers have several functions, some are reserved for future use. The 10-pins header offers
various communication and synchronization lines, the 6-pins header provides access to UART
communication. Note that MTi’s with an RS422 interface don’t have a USB interface. Make sure to
always apply a common ground (see
https://base.xsens.com/hc/en-us/articles/211592185-
).
12
SyncIn referred to as “In 1“ in software.