XSBox R4v, Руководство пользователя

Страница: 40 / 58

User Manual
40
Configure port forwarding
Administration interface >> Security >> Port Forwarding
You can determine the service which should be forwarded to a computer in your local network from the internet.
Note: Port forwarding is only possible if the XSBoxR4v 's firewall is activated.
1. Click on the button Add service .
2. Enter your data in the fields.
3. Click on the button OK .
Select WLAN channel
Administration interface >> WLAN >> Channel selection
You can select a WLAN channel and thus determine which WLAN frequency is used by the XSBoxR4v for sending and
receiving. Connection speed between the XSBoxR4v and PCs/laptops connected over WLAN can be improved if a chan-
nel with good transmission quality is selected.
■
If you want the XSBoxR4v to automatically choose the channel with the best transmission quality, then click on
automatic channel selection and then click on OK .
The automatic channel selection checks the quality of all available channels one after another; this procedure
takes approximately 12 seconds. Should the connection between PC/laptop and the XSBoxR4v be disrupted,
simply reconnect.
■
If you would like to appoint the channel yourself , choose the desired entry from the selection list manual chan-
nel selection . Click on the button OK .
Adjust WLAN Signal strength
Administration interface >> WLAN >> Signal strength
You can change the coverage of your WLAN network by adjusting the WLAN signal strength.
■
Select the desired value from the selection list signal strength. 100 % means full WLAN signal strength, 25 %
means minimum WLAN signal strength. The WLAN interface also transmits a very low output at 25%. If you do
not wish to use the WLAN interface, deactivate the interface under:
Administration interface >> WLAN >> Connection